Purso general terms
Alloys
If not otherwise stated the alloy used is EN AW-6063 T5, according to EN 573-3:1994. Mechanical properties are according to EN 755-2:1997. If anodizing quality is required, this shall be separately and clearly stated in the order.
Tolerances
Tolerances of the profiles are according to EN 755-9. Other tolerances can be used if separately so agreed. Normal radius for sharp corners and edges is 0,5mm.
Orders
Profile and component orders to be send by e-mail to: orders@purso.fi
Building system orders to: psarjatilaukset@purso.fi
The order to be contain profile ID, ordered qty, request of delivery time, delivery- and invoicing address, VAT-number, customer order number and contact person.
Order changes and cancellation
Confirmed order is always binding!
In case of agreed changes / cancellation between parties, Purso reserves right to invoice 10% of the original order value.
Changes to be always made in writing and apply on case by case basis.
Delivery lengths
Standard delivery length of the profiles is between 4,0–8,0 m, for building systems 6,6 m, tolerance according to EN 755.
Other lengths can be delivered according to separate agreement. Pls. note that max. length is 16 m.
Prices
If not otherwise stated, the prices given are in Euros (EUR) and based on the assumption that the goods are ordered in minimum consignments of 1000kg per profile.
Taxes, duties, levies or payments of similar kind are not included in the prices.
Prices given are valid for deliveries during a period of one (1) month from the date of the offer.
Terms of payment
Payment of each delivery shall be made against PURSO OY’s invoice and prior to the delivery.
Open credit is granted only against sufficient guarantees and shall be separately agreed.
Interest on overdue payments will be charged at a rate stated at each invoice.
Validity of the offers
If not otherwise stated, given prices and conditions are valid for orders one (1) month
from the date off the offer.
Execution of orders
Orders for delivery of the goods are to be given in writing.
No order is binding without a written acknowledgment from PURSO OY.
Minimum quantities
Minimum ordering quantity of a standard or customized profile is 500kg.
For smaller quantities a separate setting cost will be charged.
Terms of delivery
If not otherwise agreed, prices given are based on the trade terms FCA Siuro, INCOTERMS 2020.
Retention of title rights
Title of the delivered goods shall remain the property of Purso Oy until customer has completely met all its obligations arising from the business relationship. Unpaid Goods to be stored separately at customer.
Extended retention of title is effective in countries where applicable according to law, among others in Germany (”erweiter Eigentumsvorbehalt”).
Packing
Given prices include standard export packing, i.e. cardboard box with wooden hoops, plastic wrap and PE carpet between layers.
Deviations in quantity
Ordered amounts are considered approximate quantities only and the delivered quantities may differ from the ordered with +/- 10%, but not less than +/- 50kg.
For components, delivered quantities may differ from order -0/+10%
Invoicing is done according to the delivered quantity.
Remarks and claims
Remarks or claims concerning the delivered goods must be made within 14 days and in transport damages within 7 days from the delivery at the customer.
If no remarks have been made during this time period, the goods delivered shall be deemed conforming to the order as to quality and quantity.
Drawings
All drawings and models made by PURSO OY are the property of PURSO OY and may not be copied or disclosed to any third party without the written consent from PURSO OY.
Anodized and powder coated profiles.
Hanging marks will appear by the sides and at the end of the profiles.
In case additional support is needed in the middle of the profile, it may cause an additional mark.
Storage of powder-coated, anodised and raw profiles
Profiles in their transport packaging, which are to be installed or processed further at a later stage, shall always be stored in a dry place, well protected from rain, direct sun light and any risk of mechanical damage. The packaging of profiles may not be wet nor be exposed to humidity.
Surface care for powder-coated, anodised and raw profiles
Surfaces shall be inspected and cleaned at least once within 12 months: washing with a synthetic, neutral (pH 5–8) detergent solution followed by rinsing with clean water at room temperature. For cleaning no mechanical means such as steel wool, steel brushes etc. may be used. Furthermore, neither basic nor alkaline cleaning detergents may be used.
Extrusion dies
All extrusion dies placed at PURSO OY, whether paid by the customer or PURSO OY, are the property of PURSO OY. Dies for customized profiles are used only by order from the original customer for the profile concerned or with his written consent. Dies will be stored three (3) years after last delivery of the profile whereafter they will be destroyed.
By written agreement between the parties, dies may be stored for a longer period at the customer’s expense.
All the rights for the dies will cease, if the customer will be set up in liquidation, bankruptcy or if the operations ceases.
For first delivery produced with new die, no binding time of delivery can be given.
New die(s) requires several trials / corrections before it is ready for production.
Test reports
If customer wants test report for each delivery, separate cost will be charged.
To be agreed at the latest upon order.
Patents
PURSO OY takes no responsibility for possible patent or copyright violations or other infringements of industrial property rights concerning profiles made according to the customers model or drawing.
Force Majeure
According to Orgalime S2000/NL17
In addition to the reasons mentioned in Orgalime S2000 / NL 17, machines or tools and the simultaneous failure of any backup dies in a way that makes contractual ones impossible fulfilling obligations on time.
Other conditions
The contract shall be governed by the substantive law of Finland. Other conditions according to ORGALIME S2000, except in Scandinavia according to NL 17.
Extended retention of title in Germany
Title to the goods delivered shall remain the property of Purso Oy until customer has completely met all its obligations arising from the business relationship (in Germany “erweiterter Eigentumsvorbehalt”).
Title to goods is retained even when they are processed, remodeled, transformed, mixed or operated. It extends to the newly resulting product at a rate corresponding to the ratio of the value of Purso Oy’s product to that of the newly resulting product. To that extent every such processing, remodeling, transforming, mixing or operating is considered to have been performed for Purso Oy, title acquisition as stipulated in § 950 BGB being excluded (“Verarbeitungsklausel”).
The customer shall be entitled to resell the goods (or the processed, remodeled, transformed, mixed or operated products made from them) by means of proper sales transactions. The customer at this time already assigns Purso Oy in advance the sum (of part of sum) of any claims arising against third parties because of the resale or any other legal reason as security corresponding to our invoiced amount for the goods (or our share of the goods).
Provides that the customer shall duly fulfill his payment obligations to Purso Oy, he shall be authorized to collect these receivables for the account of Purso Oy. In the event of the customer suspending payment or falling into bankruptcy, Purso Oy shall be entitled to demand from the customer transfer of all claims arising of the disposal as well as returns of goods still in stock (“Verlängeter Eigentumsvorbehalt”).